#!/bin/sh


# ath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
# 	ssid test nwkey *****
# 	powersave off
# 	bssid 00:05:5d:89:6a:33 chan 7
# 	address: 00:05:5d:89:6a:33
# 	media: IEEE802.11 autoselect mode 11b hostap
# 	status: no network
# 	inet6 fe80::205:5dff:fe89:6a33%ath0 prefixlen 64 scopeid 0x1
# ex0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500
# 	capabilities=7<IP4CSUM,TCP4CSUM,UDP4CSUM>
# 	enabled=0
# 	address: 00:50:da:0a:f5:f2
# 	media: Ethernet 10baseT
# 	status: active
# 	inet 192.168.29.1 netmask 0xffffff00 broadcast 192.168.29.255
# 	inet6 fe80::250:daff:fe0a:f5f2%ex0 prefixlen 64 scopeid 0x2
# atw0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500
# 	ssid test nwkey *****
# 	powersave off
# 	bssid 02:e0:98:ad:ba:0e chan 6
# 	address: 00:e0:98:ad:ba:0e
# 	media: IEEE802.11 autoselect adhoc
# 	status: active
# 	inet6 fe80::2e0:98ff:fead:ba0e%atw0 prefixlen 64 scopeid 0x3
# wm0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
# 	capabilities=7<IP4CSUM,TCP4CSUM,UDP4CSUM>
# 	enabled=0
# 	address: 00:07:e9:26:9c:5c
# 	media: Ethernet 10baseT
# 	status: active
# 	inet 10.0.3.5 netmask 0xffffff00 broadcast 10.0.3.255
# 	inet6 fe80::207:e9ff:fe26:9c5c%wm0 prefixlen 64 scopeid 0x4
# lo0: flags=8009<UP,LOOPBACK,MULTICAST> mtu 33196
# 	inet 127.0.0.1 netmask 0xff000000
# 	inet6 ::1 prefixlen 128
# 	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
# ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
# ppp1: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
# sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
# sl1: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
# strip0: flags=0 mtu 1100
# strip1: flags=0 mtu 1100

# ~/scratch-cuw/Z/hsls/hslsd -i ex0 -i atw0 -m -o /tmp/hdump -L all -l lsu -l peer -l relay